Rechargeable Ni-Mh Button Cell Battery pack 3.6V80mAh

1. Model: 60H 3.6V80mAh
2. Rechargeable environment: Charge (0~45°C)/Discharge (-20~45°C)
3. Standard Current: Charge (6mA)/ Discharge (12mA)
4. Current Range: Charge (3~12mA)/ Discharge (≤30mA)
5. Cut-off Voltage: 3.0V
6. Cycle life: >500 cycles
7. Packing: Neutral Industrial carton packing
8. Application: Instrument, lamps and lanterns, remote control, toys, power supply, stationery, electric power power supply

OEM Service: 

According to your request, ends of the battery can be welded with pins or solder lugs or combined into battery series (2.4 V 3.6 V 4.8 V 6 V 7.2 V, etc.) you need.

1. 12 months quality warranty
2. Untra environmental friendly button cell battery
3. Long working time
4. Made from high-quality materials
5. Excellent performance
6. Multi-applicable
7. Excellent storage performance and low self-discharge rate
8. Excellent safety performance

1. Memory back up;
2. Medical equipment,
3. Data acquisition systems;
4. Electronics communication devices;
5. Remote keyless entry, security devices;
6. Games, cameras and audio equipment;
7. Watches, clocks, hearing aid, calculators;
8. Industrial monitors/controls, switch board, radios and transceivers ;
9. Typically used as the CMOS backup battery on the motherboard of computers such as Pentium, Celeron, Athlon, Sempron and other models.
10. Application: automatic production and computer main board, remote controller, electronic dictionary, electronic flash light, micro-electronic equipment and other electronic device.

1. Do not dispose of cell into a fire or dismantled under any condition
2. Do not mix different cell types and capacities in the same battery assembly
3. Charge and discharge under specified current recommend to the specification
4. Short circuit leading to cell venting must be avoided
5. Never solder onto cell directly
6. Cell reversal should be avoided
7. Use batteries in extreme condition may affect the service life, such as: extreme temperature ,deep cycle,extreme overcharge and over discharge
8. Batteries should be stored in a cool, dry place,Please discharge before mass storage or transportation
9. Once problems be found,stop using,send batteries to local agent
10. To maintain the performance of the cell stored for about 6 months, cycling(charging and discharging) the cell for several times is recommended